root android in easy way
Step 1 : Plug in and connect your android
device to your computer via USB and it will
initiate driver installation for the device.
Install them. Skip this if you have done this
already before. Step 2 : Unplug and re-
connect, but this time select ''Charge only'' to
sure that your phone’s SD Card in not
mounted to your PC during the rooting
process. Step 3 : Put your android into USB
Debugging mode. Go to Settings > Applications
> Development and enable USB Debugging.
This will enable SuperOneClick to root your
android device by running the exploit from
your PC while connected via USB. Check all
the steps. All drivers should be installed. You
SD card must be un- mounted and USB
Debugging must be enabled. Now get ready.
Step 4 : Open the superoneclick folder you’ve
downloaded and run SuperOneClick.exe file.
You will see the window (below). Click on the
''Root'' button. You will get messages like
shown below and if everything goes well you
will get OK messages a lot. Step 5 : It takes
just a minute. And after its done you will see a
''Running a Su test Success!'' which means the
rooting process is completed. Go to your
phone app drawer and you will see Superuser
icon which means you now have root access.
(reboot the phone if you don’t see it) Try with
your own risk...!
device to your computer via USB and it will
initiate driver installation for the device.
Install them. Skip this if you have done this
already before. Step 2 : Unplug and re-
connect, but this time select ''Charge only'' to
sure that your phone’s SD Card in not
mounted to your PC during the rooting
process. Step 3 : Put your android into USB
Debugging mode. Go to Settings > Applications
> Development and enable USB Debugging.
This will enable SuperOneClick to root your
android device by running the exploit from
your PC while connected via USB. Check all
the steps. All drivers should be installed. You
SD card must be un- mounted and USB
Debugging must be enabled. Now get ready.
Step 4 : Open the superoneclick folder you’ve
downloaded and run SuperOneClick.exe file.
You will see the window (below). Click on the
''Root'' button. You will get messages like
shown below and if everything goes well you
will get OK messages a lot. Step 5 : It takes
just a minute. And after its done you will see a
''Running a Su test Success!'' which means the
rooting process is completed. Go to your
phone app drawer and you will see Superuser
icon which means you now have root access.
(reboot the phone if you don’t see it) Try with
your own risk...!
No comments:
Post a Comment